What precautions should be taken in the maintenance and installation of LED flexible light strips?

The LED flexible light bar has a service life of up to 30,000 to 50,000 hours in normal use, so it is favored by the public. However, any electronic product cannot rule out the individual cases of poor electrical properties. So sometimes I hear buyers say that the customer's LED flexible light strip is not bright, and it is convenient for everyone to troubleshoot and solve the problem after a problem occurs. Here, LEDER Lighting teaches you a few simple maintenance methods for LED flexible light strips, so that similar problems can be solved quickly in the future.

Problem 1: The LED flexible light bar does not light up. The failure of the LED flexible light strip can be divided into two situations: one is that the whole is not bright, and the other is that the part is not bright. The former reason may be caused by a power outage caused by the plug falling off. Just check that the plug is firmly inserted. If the power outage is ruled out, consider replacing it with a new driver for debugging. Generally, it can be solved.

The second problem is more common, and the main reasons for this kind of failure are: 1. The inner body of the LED flexible light bar may be damaged due to impact during use; 2. The voltage is unstable or local high-voltage overload Cause the internal led chip to burn out. You can cut off the part that is not bright after cutting off the power, and then prepare a two-way interface plug to plug in both ends.

  Question 2: In the intelligent dimming system of the LED strip, the light color cannot be switched at will. With the rapid development of the LED industry, intelligence and dimming have become the main choice at present. The colorful lighting blends into the modern home, adding to the warm atmosphere. However, occasionally you will find that the LED flexible light strip at home cannot be switched. At this time, finding the reason is the key. Generally, there may be a problem with the controller. Check carefully to see if the interface is not strong or the controller is broken. If If it is an interface problem, just plug it in firmly. If the controller is broken, it needs to be replaced.

Precautions for installation and use of LED light strips:

1. LEDER lighting LED flexible light bar products are DC12V~24V, please connect to 12V/24 low voltage or purchase a transformer switching power supply;

2. When installing, clean the surface of the object, tear off the double-sided adhesive on the back of the product and stick it tightly;

3. For RGB full-color series, please purchase a matching RGB controller for remote control of color (24 keys/44 keys; can set monochrome/full white or remote control gradient, jump and change the color change speed...);

4. When this product is used normally, it is recommended to connect it in parallel; when used in series, the connection length should not exceed 5 meters, so as to avoid the uneven brightness of the lamp beads caused by the voltage drop of the light bar.